Step 3 Configure radius and parameter map. The client VLAN does not need to be setup on the foreign. As noted, client VLAN does not need to be setup on the foreign:. Step 3 Mac learning should be configured on the Foreign for vlan 18 and It is defined below:. Step 6 The service template contains a reference to the tunnel type and name. No features were added or enhanced for this release. Note Device Classifier has been disabled by default starting from Release 3.
Any features dependent on device classifier should enable it if required. Provides quick and easy access to all relevant documentation for specific platforms. Look for Quick Links to Platform Documentation on the respective platform documentation pages. Provides platform and software documentation for these technologies:. Eliminates the overhead of manual post install configuration on all the switches, in the smart install network.
Introduces support for Cisco EnergyWise Version 2. For more information, see the Cisco EnergyWise software release notes and configuration guide. Allows an IPv6 Static Route to be associated with a tracked-object. Controls and manages the Cisco TrustSec access control on a network device based on an attribute-based access control list.
Enables a standard CLI view including all commands by default. Displays the authentication results on the main HTML page. There is no pop-up window to display the authentication results. Ensures that one or more custom HTML pages can be downloaded and configured from a single tar file bundle.
The images and the custom pages containing the images are also part of the same downloadable tar file bundle. Supports image file names without prefixes and removes the requirement of users having to specify the wireless management interface IP to indicate the source of image in the HTML code.
Allows users to configure multiple non-link local addresses as virtual addresses. The Hot Standby Router Protocol HSRP ensures host-to-router resilience and failover, in case the path between a host and the first-hop router fails, or the first-hop router itself fails. The banner page allows you to log on to the server when the session is invalid or expired. Allows you to select the type, length, value TLV fields that are sent on a particular interface to filter information sent through Cisco Discovery Protocol packets.
Enhances route maps to enable configuration of a recursive next-hop IP address that is used by policy-based routing PBR. Helps you manually configure how the received packets should be routed. You can identify packets by using several attributes and specify the next hop or the output interface to which the packet should be sent. Extends the capabilities of object tracking using Cisco Discovery Protocol CDP to allow the policy-based routing PBR process to verify object availability by using additional methods.
Enables networks to redirect guest users to the URL they had originally requested. This feature is enabled by default and requires no configuration. Determines the level of network access provided to an endpoint based on the type of the endpoint device.
This feature also permits hardbinding between the end device and the interface. Autoconfig falls under the umbrella of Smart Operations solution. Provides a mechanism to configure multiple commands at the same time and associate it with a target such as an interface. An interface template is a container of configurations or policies that can be applied to specific ports. Provides unique customization capabilities and event driven automation within Cisco products.
Also addresses the MediaNet Video monitoring requirement to discover the signaling path and provides end-to-end diagnostics along the media stream routes. Support is added to the following APs in this release:. The destination domain name is then resolved to an IP address, which is provided to the client as a part of DNS response.
You can apply access list to a specific domain. The operating system checks for the pass through domain list, its mapping, and permits the FQDN. Users can configure device-based policies and enforce the policies per user or per device policy on the network. Local policies allow profiling of mobile devices and basic onboarding of the profiled devices to a specific VLAN.
Using MSE, you can dynamically list the clients joining to the controller. The list of clients joined to the controller is stored in the MSE as a centralized location, where the controller communicates with MSE and validates the client before reporting if the rogue client is a valid one or not. The communication between the controller and MSE is an on-demand service as the controller requests this service from MSE.
Marking and policing actions for ingress SSID and client policies are applied at the access point. The AP performs policing and marking actions for each packet. However, the controller selects the QoS policies. Marking and policing of egress SSID and client policies are applied at the controller. Statistics are supported only for ingress policies with a maximum of five classes on wireless targets.
For very large policies, statistics for ingress policies are not visible at the controller. The frequency of the statistics depends on the number of clients associated with the access point. After the applications are recognized, the AVC feature enables you to either drop, mark, or police the data traffic.
AVC is configured by defining a class map in a QoS client policy to match a protocol. The QoS actions supported for upstream flow are drop, mark, and police, and for downstream flow are mark and police. AVC QoS is applicable only when the application is classified correctly and matched with the class map filter in the policy map.
Note This feature is applicable only to wireless clients. Support for Syslog traps using the snmp-server enable traps syslog command. After enabling Syslog traps, specify the trap message severity by using the logging snmp-trap command. Use the logging snmp-trap 0 7 command to enable all severity levels 0 to 7.
To enable individual trap levels, configure the following commands:. Note that, along with the Syslog traps, the Syslog history should also be applied. Without this configuration, Syslog traps are not sent. Use the logging history informational command to enable the Syslog history. Support for IPv6 destination server export. You do not have to create a separate WLAN for You can specify the non Table 2 lists the three optional uplink network modules with 1-Gigabit and Gigabit slots.
You should only operate the switch with either a network module or a blank module installed. Table 2 Supported Network Modules. Four 1-Gigabit small form-factor pleadable SFP module slots. Any combination of standard SFP modules are supported. Note The module is supported only on the port models. Table 3 Catalyst Switch Models.
Catalyst switches support a wide range of optics. Because the list of supported optics is updated on a regular basis, consult the tables at this URL for the latest SFP compatibility information:. Cisco Wireless Controller for up to 25 Cisco access points. Cisco Wireless Controller for up to 50 Cisco access points. Cisco Wireless Controller for up to Cisco access points.
Table 5 lists the supported products of the Catalyst Switch. Table 5 Catalyst Switch Supported Products. Cisco Aironet , W, , , , , , , , , , , , Table 6 lists the specific supported Cisco access points. Table 6 Supported Access Points. Table 7 lists the software compatibility matrix. Table 7 Software Compatibility Matrix. Therefore, we recommend that you upgrade to MSE 8. Cisco WLC Release 7. Prime Infrastructure 2. For more information on the compatibility of wireless software components across releases, see the Cisco Wireless Solutions Software Compatibility Matrix.
You can use the show version privileged EXEC command to see the software version that is running on your switch. Note Although the show version output always shows the software image running on the switch, the model name shown at the end of this display is the factory configuration and does not change if you upgrade the software license.
You can also use the dir filesystem : privileged EXEC command to see the directory names of other software images that you might have stored in flash memory. After a successful authentication on the WebAuth login page, the original requested URL opens in a pop-up window and not on the parent page. To download a sample Web Authentication bundle, follow these steps:. Step 3 Click a switch model.
Step 5 Choose Release 3. Step 6 After the download, follow the instructions provided in the Read Me file that is attached in the bundle. Note In a High Availability scenario, if you download the Web Authentication bundle to the active controller, the bundle cannot be synchronized with the standby controller. Therefore, we recommend that you also manually download the Web Authentication bundle to the standby controller.
Before upgrade, generate the server key using the crypto key generate rsa command in global configuration mode. To verify whether the RSA server key is available on your device, run the show crypto key command. The Catalyst switch supports three different feature sets:. Note A separate access point count license is required to use the switch as a wireless controller. For more information about the features, see the product data sheet at this URL:. This section describes the interoperability of this version of the switch software release with other client devices.
Table 11 lists the client types on which the tests were conducted. The clients included laptops, handheld devices, phones, and printers. Run the show iosd liin command. Get the internet-address and configure the same IP as permit in the access-list.
The Bug Search Tool BST , which is the online successor to Bug Toolkit, is designed to improve the effectiveness in network risk management and device troubleshooting. The BST allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version.
The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input. To view the details of a caveat listed in this document:. Enter the bug ID in the Search For: field. Device is getting crashed on the "cts role-based enforcement". Double-free of VTY context causes a software-forced crash.
Span config lost after reboot when using interface ranges. Automate-tester does not send probes when the server is dead. SFP port detect link-flap error and it's in error-disabled state on Did you mean:. All Community This category This board. Labels: Labels: Catalyst All forum topics Previous Topic Next Topic. Julio E. VIP Mentor. Hi You could upgrade to the last one: cipbasek9-mz. In response to Julio E. In response to nohara. Joseph W. Hall of Fame Expert. Generally, whatever you need that's found in The In response to Joseph W.
So from Leo Laohoo. VIP Community Legend. The Cisco Catalyst provides CAPWAP termination for access points, uniform policy enforcement for wireless clients, better wireless bandwidth, and uniform Cisco IOS Software-based configuration and monitoring for wired plus wireless features. Backward compatibility with traditional centralized wireless deployment mode on the WLC , WiSM2, and WLC helps ensure that customers can migrate to the Cisco Catalyst based converged access approach in phases, providing a continued controller for existing access points.
This migration also provides investment protection on the existing wireless controller infrastructure. A phased adoption of the new Cisco Catalyst helps ensure that migration to the converged access mode of wireless is seamless. Figure 5 shows the Cisco Catalyst in a campus deployment.
In this mode, not only can the switch terminate CAPWAP tunnels from the access points and provide client connectivity, it can also manage mobility within the branch. This eliminates the need for a local controller in every branch in addition to the access-layer switches. Also, complete visibility into the wired plus wireless traffic means that the WAN router can prioritize the right wired plus wireless traffic in and out of the branch. Figure 6 shows the Cisco Catalyst in a branch deployment.
Cisco Catalyst Series Specifications. Table 7 shows Cisco Catalyst Series Switches performance specifications. Table 7. Cisco Catalyst Performance Specifications. Performance Numbers for All Switch Models. Switching capacity. Stacking bandwidth. Total number of MAC addresses. FNF entries. Total switched virtual interfaces SVIs. Jumbo frame. Total routed ports per stack.
Total number of WLANs per switch. Wireless bandwidth per switch. Up to 40 Gbps on port models. Up to 20 Gbps on port models. Supported Aironet access point series. Forwarding Rate of Switch Models. Forwarding Rate. Table 8 shows dimensions, weight, acoustic, mean time between failure MTBF , and environmental range. Weight includes the chassis assembly as it is shipped: three fans, two StackWise adapters, and one power supply blank.
The weight also includes the default power supply that is shipped with the unit. Table 8. Dimensions H x W x D. MTBF Hours. Environmental Ranges. With AC Power Supply. Operating Environment and Altitude. With DC Power Supply. Normal operating temperature and altitudes:. Relative Humidity. Acoustic Noise. Typical: Noise emission for a typical configuration. Maximum: Statistical maximum to account for variation in production. Storage Environment. Altitude: 16, ft 5, m.
Operating: 0. Nonoperating: 1. Operating: 30G, 2ms half sine. Nonoperating: 55G, 10ms trapezoid. Connectors for Cisco Catalyst Series. Table 9. Connectors and cabling. Power connectors. Table 10 shows management and standards support for the Cisco Catalyst Series. Table IEEE Table 11 lists the power specifications for the Cisco Catalyst Series based on the kind of power supply used.
Power Specifications for Cisco Catalyst Series. Power Supply Rated Maximum. Input-Voltage Range and Frequency. Input Current. Output Ratings. Output Holdup Time. Power-Supply Input Receptacles.
IEC C Terminal strip. Power Cord Rating. Physical Specifications. Weight: 3. Weight: 2. Operating Temperature. For the operating temperature ranges at various altitudes of AC and DC power supply module powered switches, see Table 1.
Storage Temperature. Relative Humidity Operating and Nonoperating Noncondensing. Safety Compliance. LED Indicators. Power supply rated maximum. Input-voltage range and frequency. Input current. Output ratings. Output holdup time. Power-supply input receptacles. Power cord rating. Physical specifications. Weight: 3 lb.
Operating temperature. Storage temperature. Relative humidity operating and nonoperating noncondensing. EN Class A. Safety compliance. LED indicators. The values given are the maximum possible power consumption numbers under the respective test scenarios.
Table 13 lists the safety and compliance information for the Cisco Catalyst Series. Safety Certifications.
UL Second Edition. EN Second Edition. IEC Second Edition. NOM obtained by partners and distributors. Electromagnetic Emissions Certifications.
KN22 Class A. CNS Class A. Noise Specifications. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product.
We encourage you to review carefully the warranty statement shipped with your specific product before use. Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
Table 14 provides information about the E-LLW. E-LLW Details. Device Covered. Applies to Cisco Catalyst Series Switches. Warranty Duration. As long as the original customer owns the product. EoL Policy.
0コメント